https://www.youtube.com/watch?v=_b-m69_obcM I have to be honest. I don’t normally stand around in 4”-5” of water on the job. I do however walk through unplowed driveways, parking lots and through the rain while moving tools and equipment in and out of the truck so having dry feet is paramount to capping off a good day at Read more
ProStaff Reviews
I have to be honest. I don’t normally stand around in 4”-5” of water on the job. I do however walk through unplowed driveways, parking lots and through the rain while moving tools and equipment in and out of the truck so having dry feet is paramount to capping off a good day at work.
I’ve been wearing the KEEN Utility Pittsburgh boots for work [and play] for a couple months now and I’m impressed not only with the KEEN.DRY system but the comfort and support has surpassed my expectations. For those not familiar, the KEEN.DRY system is a proprietary waterproof membrane that lets vapor out without letting water in. I’d put it up against the major brand of waterproofing we’re all familiar with.
The support and protection built-in include full-length TPU stability plate providing forefoot flexibility and underfoot stability; when mated with the metatomical footbed design where an engineered arch support cradles your foot for all day comfort.
I’ve been a longtime wearer of natural leather upper boots so moving into a composite build boot of natural leather and cloth took a little getting used to. Boots like the Pittsburgh are slightly bulkier than the typical all-leather boot but that has more to do with the engineering in design for flexibility and durability. Rubber, cloth, nubuck leather all play a role in the upper build of the boot.
The soles are non-slip oil resistant rubber and provide aggressive traction on this model. I’m more accustomed to a less “off-road” tread but I haven’t found anything negative to say about the tread pattern; if I have any comments on the tread I’d say climbing my step ladder is where I most notice the aggressive pattern. Once in a while my foot will catch on the edge of a ladder rung where it may not have with a smoother, more typical work boot tread pattern.
Overall I’m impressed with the KEEN Utility Pittsburgh boots. Material quality is very high, build quality as well. Comfort concerns went straight out the window after day one of wear and have not changed in the short time I’ve been putting them to work. I’ve got my eye on a few other models that may be a little closer to what I’m used to for style and features but, these being the most popular model in the US [in Canada they’re known as the Hamiltons] I’m not surprised based on the overall quality and design.
Click this link to visit KEEN’s site and see more about the Pittsburgh boots.
Innovation takes on many forms, but in the world of plumbing and HVAC piping systems, change and or progress has been somewhat slow to take place. Copper press fitting systems have been on the scene for nearly 20 years in the U.S., even longer in Europe, but industry-wide adoption is a work in progress. If Read more
Innovation takes on many forms, but in the world of plumbing and HVAC piping systems, change and or progress has been somewhat slow to take place. Copper press fitting systems have been on the scene for nearly 20 years in the U.S., even longer in Europe, but industry-wide adoption is a work in progress. If you’ve been following us here on The Hub you already know my opinion that pressing copper or iron pipe for nearly every application is not only efficient but also profitable for any size contracting firm. But I’m not here to debate the merits of press versus soldering or threading; instead, I’d like to talk about a couple new tools we’ve had in the shop for review.
The new Gorilla™ pressing tool line features two unique tools: the inline battery pressing tool (INLNPRESS-KIT19kN) and the pistol grip battery powered pressing tool (PSTLPRESS-KIT32KN). I’ve personally put both tools to work on a handful of plumbing and heating projects over the last month, and I’m impressed.
Not unlike other press tools in the market the Gorilla press tools will complete a watertight connection, whether pressing copper, steel or PEX, with a 3-5 second cycle time. Here are the features of each tool kit broken down separately:
Pistol Press (PSTL-KIT32kN)
The larger of the two Gorilla press tools is capable of pressing up to 2″ copper or steel fittings with the included tongs/jaws. When equipped with compatible jaws such as the RIDGID XL-C or Milwaukee M18 ring sets the pistol tool is capable of joining 2-1/2″ thru 4″ copper and steel. Greenlee offers additional factory supplied jaw sets for PEX Press systems (NIBCO) as well.
The key here is jaw compatibility. For contractors who already own other press tools or for those looking at a new press tool as a first purchase knowing what tool is right for you based on its capabilities should be the focus. The PSTL tool is compatible with all of the Viega PROPRESS copper, stainless and iron pipe (MEGAPRESS) fitting systems when either using the Greenlee jaw sets for 2″ and smaller copper or the RIDGID or Milwaukee M18 jaws for XC copper fittings or MEGAPRESS. A list of compatible jaw sets is included at the bottom of this review.
The PSTL-KIT32kN kit includes six V-profile copper/steel press jaws in sizes from 1/2″ to 2″, two 3.0Ah 18V Makita battery packs, rapid battery charger and heavy duty case with foam tool organizer insert. The 7,200 lb (32kN) force is delivered to the jaw set at the end of the swivel shaft. The unique pistol-grip offers an ergonomic design, placing the majority of the weight directly over the users hand and wrist for more balanced control when using the large diameter jaws. A single trigger deploys the hydraulic piston for a 3-5 second press cycle but is not automatic, requiring the user to fully depress the trigger for the entire cycle. However, once the press is complete, the tool retracts automatically, which does not require the operator to hold the trigger. In addition, the tools have the ability to retract the jaws at any point in time. An indicator light illuminates if the tool senses insufficient force during a press cycle and AUTOSTOPP technology stops the piston once optimal force is reached to complete the press of a fitting. The tool carries a 5-year warranty from the manufacturer and boasts the ability to go 40K press cycles before factory authorized service is required.
Inline Press (INLNPRESS-KIT19kN)
This is the more compact tool of the Gorilla lineup. Measuring in at just over 17″ when geared up with the 3/4″ copper jaws this swivel shaft tool is sleek and capable of sitting in tight spaces where only one hand may be appropriate for tool operation. The 4,275 lb (19kN) force tool features a single trigger, swivel head and 18V Makita 2.0Ah 18V battery.
The inline tool is capable of pressing both PEX press [up to 1-1/2″, see video] and v-profile copper/steel fittings (Viega type) up to 1-1/4″ diameter making it prime for all residential applications. As with the pistol tool the inline tool carries a 5-year manufacturer warranty and is capable of pressing 40K times in between service intervals. Press cycle time is 3-5 seconds depending on fitting type and diameter. The user is required to depress the trigger for the entire press cycle until the AOTOSTOP technology feature senses sufficient force, the piston retracts automatically the same as the pistol tool. The kit includes two Makita 18V batteries, rapid charger and heavy duty case with rigid foam organizer insert.
Recap
Overall the build quality of the Greenlee Gorilla press tools is high. Having been manufactured in Germany by the Greenlee owned Klauke tool company they’re developed from years of pressing experience and thousands of tools having been in use for many years. The 5-year warranty is impressive and compatibility with other manufacturer jaw sets makes both models very attractive in my opinion. Current jaw offerings open these tools up to the popular Sporlan Zoomlock refrigeration press fitting system as well even further expanding the capabilities and usefulness of these tools to HVAC contractors as well as plumbers. The Inline tool kit should be expected to price out between $2,100-$2,300, the more capable pistol tool will cost a contractor $3,300-$3,500 for the kit making both tools competitive in the press tool market.
Are you ready to ditch the gas can and forever say goodbye to pesky 2-stroke engines that, for no matter how hard you try, never seem to run right come springtime? The big three tool manufacturers have hit the summer of 2017 running with cordless string trimmers, blowers, hedge trimmers and even chainsaws that operate Read more
Are you ready to ditch the gas can and forever say goodbye to pesky 2-stroke engines that, for no matter how hard you try, never seem to run right come springtime?
The big three tool manufacturers have hit the summer of 2017 running with cordless string trimmers, blowers, hedge trimmers and even chainsaws that operate on the same batteries you have in the shop or on the job.
Banking on the more power is better philosophy; these cordless yard machines are delivered with large capacity battery packs. The same batteries running high demand tools like right angle drills, rotary hammers and saws.
Whether you’re tired of finicky small engines or have better things to do with your time than make that last minute run to the gas station just so you can mix up a gallon or two to trim out the yard, these tools are definitely worth looking twice at.
Here is a quick rundown of my own experience with the Dewalt 60V, Milwaukee 18V and Makita 36V OPE. Watch for additional reviews as more tools are arriving weekly here at The Hub.
Milwaukee M18 FUEL String Trimmer
New product/tool design engineers are always tasked with designing the next best thing, the fastest or most powerful tool that will turn heads and ring in sales. One guiding principle in design is the “KISS” method. Standing for “keep it simple stupid” but it’s not necessarily a negative connotation in the final production model of the M18 string trimmer.
With a simple safety locking throttle trigger, high/low speed selection and a single 9.0Ah battery pack this trimmer is as simple as it gets. Oh yeah, and its extremely powerful. The 14”-16” cutting swath and straight shaft are perfect for clearing thick overgrowth or manicuring your 9th hole-like lawn.
I only wish my video turned out a little better but you’ll have to take my word for it, this 18V tool is a beast when considering power and runtime. You’ll want to have a 9.0Ah battery but you’ll only need one to finish your yard. I trim about an acre and can complete the job on about 2 bars.
Dewalt 60V MAX String Trimmer If you’re familiar with the new FLEXVOLT tool lineup from Dewalt then take a look at this trimmer. Running on a single 60V 3Ah FLEXVOLT battery, this cordless trimmer has a ton of power upfront and decent battery runtime. Motor placement is different than all the others in this category in that it’s placed directly at the head/end above the line spool. Like the other two here the 60V MAX uses full-sized trimmer line, which absolutely rocks when comparing these trimmers to early models of electric/cordless trimmers. I have run this trimmer thru some pretty tough paces and have been thoroughly impressed with its power. I’m a little concerned with the amount of debris buildup on the motor housing but I believe most of that is from using it to clear heavy overgrowth in the field out back. Typical yard usage would likely not cause such buildup and therefor not pose a problem to the motor itself.
Makita 36V String Trimmer
If you’ve got a couple Makita 5Ah batteries and enjoy a tool truly designed with the user in mind then look no further.
The Makita XRU09 string trimmer has an outer rotor brushless motor direct drive system which provides for high power and high torque. The engineers included nearly all the bells with this one giving it two speeds and even reverse. You might be wondering “why reverse” and the answer is simple really. When clearing tall grass or weeds in heavy overgrowth areas the head of any trimmer will likely be wrapped up over time; the reverse rotation setting allows for quick clearing of the trimmer head and in my opinion that simple genius in design. They added a switch and circuitry to run the motor backwards for a short duration, why didn’t the others do that? I personally like the ergonomics of this trimmer best. Its also smoother and powerful enough to handle all my trimming needs over nearly and acre of yard and landscaping. Videos are still in the making.
Screwdrivers are screwdrivers, right? In as many years on the job as I’ve had I’ve personally used or seen screwdrivers used for any number of purposes beyond their original intent. I’m not proud of that but sometimes you do what you have to do. Then one day you realize the value of a nicely designed Read more
Screwdrivers are screwdrivers, right? In as many years on the job as I’ve had I’ve personally used or seen screwdrivers used for any number of purposes beyond their original intent. I’m not proud of that but sometimes you do what you have to do. Then one day you realize the value of a nicely designed tool and would in no way misuse it like the many tha came before it.
This is one of those tools. Take one a look at its compact design, fine machining and ergonomic design and its easy to see why we chose to do a review on something as simple as a screwdriver. I’ve heard others affectionately call this the “James Bond” of screwdrivers and for good reason. Take a look at the video, its only one minute long and I’ll show you all the features of this cool tool. If you’re interested in purchasing it visit our friends over at KC Tool.
Dewalt’s Flexvolt 60V Stud & Joist Drill may look familiar, I mean without the battery and add a cord, paint it red and you might be reminded of an old industry mainstay. But let’s forget about that old drill, made by another manufacturer and focus on what I might call the most powerful cordless tool Read more
Dewalt’s Flexvolt 60V Stud & Joist Drill may look familiar, I mean without the battery and add a cord, paint it red and you might be reminded of an old industry mainstay. But let’s forget about that old drill, made by another manufacturer and focus on what I might call the most powerful cordless tool I have ever used.
The two variable speed settings (forward, with single speed reverse) coupled with the ” E-Clutch® System” make for a high performance machine ready to handle probably anything you throw at it. I must remain honest and admit that I entered this review thinking I already knew how it would perform but not only that but how I would be sure to point out a huge flaw in the overall design. After using the drill on multiple projects, large and small, I can not say I have found a definitive job task this drill should be able to perform but cannot. Because it can and will, and it will do it faster and safer than any other drill before.
The E-Clutch system senses reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained. This is a significant technology and the first in any large pattern, full-sized rough-in drill I have used. All right-angle drills I have used, owned or tested have had mechanical clutches. Mechanical clutches are sufficient only that they will save your knuckles, face or knuckles and face sometimes but the problem is they will not always prevent a hard stop or throw from a ladder. In fact most of the time when a mechanical clutch engages on large right angle drills the user is thrown or pinned up against a nearby object and almost always materials are damaged. The E-Clutch is sensitive but will allow you to get the job done without excessive engagement and stopping. Its so smooth it will take a few engagements before you’re completely aware of why the drill stopped and what exactly is going on, I know I felt this way at first and drilling with a right angle drill is nothing new for me this long into my plumbing career.
For the video review I loaded the drill with a 3.0Ah Flexvolt (9Ah 20V equivalent) battery,fully charged. The battery had been used multiple times before on other Flexvolt and 20V MAX tools. After drilling every hole needed to complete the drain, waste and venting rough-in on a three bath house, 40 holes 2-9/16″ & 3-5/8″ diameter, the battery had used 1/3 of the total capacity as indicated by illuminating 2 of the three LED lights on the battery when finished. The whole house was drilled using nothing but cordless and not more than one battery. What a time to be alive.
The weight of the drill and its balance seem comfortable although the d-handle protruding off the backside of the head is less useful for actually drilling than it is useful for carrying and pulling the drill and bit from a completed hole. I have not used the side handle bar for any holes to date but it is included in the kit and would be useful for added control while drilling or mixing various materials like small batches of concrete or drywall compound etc.
Overall I was thoroughly impressed, I could not find any detail that stood out as a flaw or that I would consider suggesting to change. It provides more than enough power needed to complete a plumbing, hvac or electrical rough-in with ease. Its fast and efficient in its use of battery power; evident by the battery capacity used to drill all the needed holes in the video. As the Flexvolt system continues to grow and remains backwards compatible with all the 20V MAX tools I can without a doubt recommend taking a close look at this tool if you’re thinking of trying a new tool line or already on the 20V MAX platform and need to add a high performance right angle drill to your tool arsenal.
