ShopTalk

As a Mechanical Hub ProStaff member and CEO and of Thompson Family Plumbing & Rooter Inc.,  I am always searching for the best people to add to my crew and cutting-edge products to add to my inventory to save time, money and make our customers happy.

We are a family owned and operated business in California that specializes in new construction and residential service work such as drain cleaning, backflow certification, video sewer inspection services, and many more plumbing services. Since 2006, our plumbers have been delivering trusted plumbing residential and commercial services with dedication and the highest quality workmanship.

https://youtu.be/nbu5ATVOeFg

We were recently hired to do a complete re-pipe installation on a beautiful 100-year old home in Lake Arrowhead, California, and knowing that I was going to need a cost-effective, flexible and dependable piping solution, I looked at several options and chose SharkBite EvoPEX pipe and fittings.

During the process of re-piping this house, we found that the SharkBite EvoPEX system provided many benefits. As a two-man job, it was quick and easy to use, which allowed me to save labor costs. Additionally, you don’t need extra tools or glue to secure the fittings to the pipe. Because the EvoPEX system has a fool-proof green indicator ring, you know exactly when you have proper insertion depth to create a watertight and permanently engaged connection to the pipe. It is a godsend and you don’t have any guesswork. As one of the guys on the job said, “green is in for the win.”

https://youtu.be/3aIcgfcQbvY

During the installation, we only encountered one issue and that was mainly due to the location of the space which we were installing pipe. The space was tight and pushing the fitting together overhead, well, took a little extra time and some body contorting. In the end, I liked knowing that there was no way the fittings were coming apart, and at one point, I grabbed the pipe to keep me from falling off a ladder. Not that I recommend that as a test to see if the fittings stay connected, but they did.

As far as using SharkBite on the future, I have another project on the books next month that will be using the EvoPEX System. This project is a new installation and I cannot wait to use the product in a more open area as I’m sure the time savings will be extensive for the team.

Would I recommend the SharkBite EvoPEX system? Yes, in fact, I’ve had discussions with a few local plumbers asking about the system and our thoughts, since it’s so easy to use with little training.

As with any product I use for the first time, I have suggestions for things that can make EvoPEX even better and maybe should the product have an upgrade, these will be addressed. I wish this project would have had an opportunity to incorporate one of their manifold systems, as I can see the advantages of this product in multiple option sizes and angle variations. Each product has their pros and cons to each application or use, and I feel that this product is good and I will be doing more with it to get a better feel with further testing and installations in the field.

ProStaff Member Bio:

John Thompson is owner, Thompson Family Plumbing and Rooter, INC. of a leading service and repair plumbing company in Hesperia, CA. John and his wife, Devynn’s, focus is to provide superior customer service and maintain top notch plumbing skill. He is continuously pushing the boundaries in his trade and is passionate to encourage his peers to succeed with him. His company has received many worthy acknowledgements and awards from State Senators and Assemblymen for their strong presence and community involvement. Thompson Family Plumbing is constantly working to advance and support their staff and valued customers to maintain their mantra of “Always go the extra mile.”

OSHA’s Crystalline Silica Standard will be in effect September 23, 2017. OSHA is issuing the standard to protect workers from exposure to respirable crystalline silica in the construction industry in order to allow employers to tailor solutions to the specific conditions in their workplaces.

The new standard has had tool manufacturers working overtime to engineer tools and too attachments that will keep us productive while meeting the dust collection requirements. Here at The Hub we will be sharing reviews and information in the coming days and weeks leading up to September 23 date showing the various tools and attachments you might consider for your own compliance. Here is our first review:
https://youtu.be/mWLfwgkPLCc

Bosch HDC100 Dust Collection Attachment

Bosch knows concrete and the tools needed to work efficiently and effectively on the plumbing & hvac job site. Whether you’re working with a Bosch Bulldog rotary hammer or nearly any other modern rotary hammer of another brand this attachment is simple to install and use and is priced right in our opinion.

We’re referring to the HDC100 as a “universal” attachment, though it’s not listed as such on Bosch’s website it will fit any modern rotary hammer with a barrel mounting neck for a standard auxiliary handle (see pic above).

The 1.5lb composite plastic dust collection attachment has a built-in depth stop with a maximum drilling depth of 4-3/4” and can handle SDS drill bits up to ¾” diameter, dry core drilling up to 3-1/8” diameter [when using the core bit adapter, included].

As seen in the video the HDC100 is very effective at collecting nearly 100% of the dust from the ½” holes drilled for the drop-in anchors, an extremely common task on any mechanical job site. The dust port can be hooked up to a 1-3/8-In. vacuum hose nozzle, or it can accommodate 1-1/4-In. or 2-In. nozzles when combined with an appropriate optional adapter.

It is important to note that the HDC100 alone is not all that is needed for compliance with the OSHA standard. The HDC100 must be connected to a HEPA rated dust collector vacuum that meets the minimum requirements of the Crystalline Silica Standard to be compliant. In the video we are using the Bosch GBH18V-26 18V EC Brushless 1 In. SDS-plus® Bulldog Rotary Hammer and Bosch VAC090A 9 Gallon Dust Extractor with Automatic Filter Clean.

We have done some online price searches and found that nearly all Bosch tool retailers are listing the HDC100 at $69-70 US, its available for purchase currently.

This is only one of many tools Bosch has engineered to meet the OSHA standard, please watch for reviews of additional tools soon here on mechanical-hub.com.

It’s been two months since I took delivery of the Dewalt DCE200 press tool and I’ve had the opportunity to put it to work on a handful of jobs now. This is a feature-packed tool unlike many on the market today. With capabilities of handling any and all press systems common in North America and Europe team Black & Yellow pulled out all the stops in engineering their first at what I’m guessing will be a team of press tools to come.

First off I’d like to cover the important specs.

• Capable of pressing ½”-2” copper & stainless steel V-groove fittings
• Compatible with competitor jaw sets for Iron Pipe [Mega-Press]
• Compatible with competitor jaw sets for PEX press [Viega/Nibco]
• 4-ton pressing force
• Current online pricing searches average $1999.00

I first learned of this tool back in July/August of 2016 at the annual new tool event hosted by Dewalt. When I first put my hands on it I admit I was a little surprised of the physical size overall but after using it for both boiler and tankless water heater installations now I can honestly say the size of the tool has not proved to be an issue at all. Weighing in at 7.16lbs without a jaw it is lighter than other comparable tools common on the job today. Ergonomics may be a slightly different story and I do carry a bias toward in-line design press tools. This tool is front-end heavy, loaded with anything over 1″ jaws and it will not stand on it’s own. That may be partially due to the small footprint of the 20V battery or the handle angle and placement. Either way its a strain on the wrist and requires two hands to steady the tool most of the time.

Features

This pistol-grip press tool is packed with some new innovation to the market that should prove useful to many contractors working on commercial & residential projects alike. Notably, Dewalt’s proprietary software system Crimp Connect. This free software download allows the owner/user to connect the press tool via the onboard mini USB port providing ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history.

Located on the top rear of the tool you’ll find a somewhat familiar interactive panel where the tool’s power is controlled along with LED light indicators showing the successful completion of a single press, battery indicator, low & high temperature warnings. There’s even a “service required” indicator light telling the user that the tool has reached the cycle limitations.

While the power panel is not unique to press tools of this caliber, the Crimp connect feature is. An added feature I found interesting is the double trigger.

The bottom trigger controls the start and completion of the press cycle. Dewalt went with a “manual” cycle operation here. You’ll need to depress the trigger completely for the duration to complete the press cycle. Cycle time is anywhere between 4-6 seconds depending on the diameter and type of material being pressed. The unique second trigger, the top trigger can be used to release the press cycle at any point. This is useful when a cycle has started but the operator decides [far various reasons] to stop the press. When pressed fully, the top trigger will release the pressure in the hydraulic cylinder and allow the ram to retract quickly. This would allow for repositioning of the tool or fitting when needed, potentially saving a fitting from incorrect attachment to the piping.

A shoulder strap and ring attachment point are included with the tool. Dewalt states in the manual that it should be used for transporting the tool on the jobsite. Some feedback I have received from other plumbers is the strap may be useful when working on a ladder, a situation that often lends to the possibility of dropping a tool like this….I’ve done that and it wasn’t pretty.

The tool is made in France but the jaw set is delivered to Dewalt from Germany. Dewalt is offering a 3 year limited warranty, 1 year service and 90 day money back guarantee. You’ll most likely have to order this tool from specialty tool suppliers offering the whole Dewalt lineup. You can also look to plumbing and mechanical supply houses for stock as well.
https://www.youtube.com/watch?v=WVIlalA-Abs

https://www.youtube.com/watch?v=_b-m69_obcM
I have to be honest. I don’t normally stand around in 4”-5” of water on the job. I do however walk through unplowed driveways, parking lots and through the rain while moving tools and equipment in and out of the truck so having dry feet is paramount to capping off a good day at work.

I’ve been wearing the KEEN Utility Pittsburgh boots for work [and play] for a couple months now and I’m impressed not only with the KEEN.DRY system but the comfort and support has surpassed my expectations. For those not familiar, the KEEN.DRY system is a proprietary waterproof membrane that lets vapor out without letting water in. I’d put it up against the major brand of waterproofing we’re all familiar with.

The support and protection built-in include full-length TPU stability plate providing forefoot flexibility and underfoot stability; when mated with the metatomical footbed design where an engineered arch support cradles your foot for all day comfort.

I’ve been a longtime wearer of natural leather upper boots so moving into a composite build boot of natural leather and cloth took a little getting used to. Boots like the Pittsburgh are slightly bulkier than the typical all-leather boot but that has more to do with the engineering in design for flexibility and durability. Rubber, cloth, nubuck leather all play a role in the upper build of the boot.

The soles are non-slip oil resistant rubber and provide aggressive traction on this model. I’m more accustomed to a less “off-road” tread but I haven’t found anything negative to say about the tread pattern; if I have any comments on the tread I’d say climbing my step ladder is where I most notice the aggressive pattern. Once in a while my foot will catch on the edge of a ladder rung where it may not have with a smoother, more typical work boot tread pattern.

Overall I’m impressed with the KEEN Utility Pittsburgh boots. Material quality is very high, build quality as well. Comfort concerns went straight out the window after day one of wear and have not changed in the short time I’ve been putting them to work. I’ve got my eye on a few other models that may be a little closer to what I’m used to for style and features but, these being the most popular model in the US [in Canada they’re known as the Hamiltons] I’m not surprised based on the overall quality and design.

Click this link to visit KEEN’s site and see more about the Pittsburgh boots.