With no-lead brass now the norm in our industry, we wanted to share some information about our new carton label format and the information it contains. The top of the label shows the A.Y. McDonald logo, the Truesdail Laboratories logo (designates product is third party certified to NSF/ANSI 61-8 and/or NSF/ANSI 372 lead content requirements) Read more
ShopTalk
With no-lead brass now the norm in our industry, we wanted to share some information about our new carton label format and the information it contains. The top of the label shows the A.Y. McDonald logo, the Truesdail Laboratories logo (designates product is third party certified to NSF/ANSI 61-8 and/or NSF/ANSI 372 lead content requirements) and a picture of the product inside the carton.
The next row designates our model number with a detailed description of the product. This also includes our internal seven-digit number and UPC code.
Perhaps the most important information for you is on the next row. This includes information about the carton weight and pieces per carton. The golden bar with ‘No-Lead’ will be included for all products that comply with the federal legislation. Finally, on the far right are production codes which are used for quality and tracking purposes (as seen below on the example, the production codes for this sample is TF059904 & MQ).
Read More – http://www.aymcdonald.com/en-US/Newsletters.html
Fort Wayne, IN—January 13, 2014. Franklin Electric Co. Inc. (www.franklin-electric.com – NASDAQ:FELE) announces the release of the C1 Series stainless steel submersible cistern pumps designed for use in gray water/filtered effluent service applications, with the ability to pass solids up to 1/8″ in diameter during normal operation without impacting the life of the pump. The Read more
Fort Wayne, IN—January 13, 2014. Franklin Electric Co. Inc. (www.franklin-electric.com – NASDAQ:FELE) announces the release of the C1 Series stainless steel submersible cistern pumps designed for use in gray water/filtered effluent service applications, with the ability to pass solids up to 1/8″ in diameter during normal operation without impacting the life of the pump. The C1 Series is constructed of a 304 stainless steel motor and outer shell with engineered polymer hydraulics providing superior corrosion resistance and abrasive handling.*
Hailed for savings directly related to installation and labor time, Sioux Chief’s StrongArm bracketing systems provide a clean and strong solution for Stub Outs. Sioux Chief’s StrongArm video demonstrates the high quality and versatility of the product.Rough plumbing manufacturer, Sioux Chief, announced the launch of its new StrongArm product video that enables plumbing contractors and wholesalers to Read more
Hailed for savings directly related to installation and labor time, Sioux Chief’s StrongArm bracketing systems provide a clean and strong solution for Stub Outs. Sioux Chief’s StrongArm video demonstrates the high quality and versatility of the product.Rough plumbing manufacturer, Sioux Chief, announced the launch of its new StrongArm product video that enables plumbing contractors and wholesalers to know more about Sioux Chief design innovation, product features and installation techniques.Each StrongArm is pre-assembled with either one or two LockBlocks™ or PEX Bend Supports for toilet, lavatory, sinks or hose bib Stub Outs. Sioux Chief offers many options that allow the brackets to be mounted to the face of the studs, inside the stud cavity or directly to the pipe vent.“The StrongArm bracketing system was created because plumbing contractors who install PEX tubing and other flexible pipe materials told us they needed a very secure bracketing system — something that sheetrockers can’t tear up and that also removes the torch from the job site.” Said Rex Baer, Vice President of Product Development at Sioux Chief.Key features of the StrongArm are:Rigidly secures to any copper, PEX or CPVC CTS Stub Out and prevents any movementVersatile for 16″ and 24″ stud bays with either one or two pre-installed LockBlock devicesEliminates the need to solder Stub OutsRemoves the risk that Stub Outs will be damaged by other tradesThe new Sioux Chief rough plumbing video series offers plumbing contractors need-to-know information about time, labor and money saving innovations in Sioux Chief’s Supply, Drainage and Support categories.Sioux Chief products are sold through wholesale plumbing distributors nationwide.
via Sioux Chief Launches StrongArm™ Product Video | Sioux Chief Blog.
Swanson® Tool today unveiled a new tape measure under its premium Savage® brand, that features a patent pending rotating tip that is specifically designed to hold rounded edges up to 2-inches in diameter, such as metal conduit, rebar, threaded rod, PVC and black iron pipe. With the ability to catch, hold and measure multiple types Read more
Swanson® Tool today unveiled a new tape measure under its premium Savage® brand, that features a patent pending rotating tip that is specifically designed to hold rounded edges up to 2-inches in diameter, such as metal conduit, rebar, threaded rod, PVC and black iron pipe. With the ability to catch, hold and measure multiple types of materials, the new GripLine™ tape is ideal for plumbing, electrical, builder and carpenters, framing pros and DIY enthusiasts.
A slotted groove in the innovative, pivoting head allows the oversized 1⅜-inch tip to slide seamlessly toward an object, thereby extending the tape’s gripping range and strength. In fact, this free-moving tip makes the GripLine the industry’s only tape measure capable of extending up to 1-inch of additional surface area and holding force toward any edge or endpoint.
With the 360-degree hooking capability, this new tip design gives contractors’ maximum control when drawing the tape against an object, making the tape feel more like an extension of their arm than a hand tool.
“This multi-function, magnetic and pivoting tip is what makes the GripLine tapes a truly innovative solution for builders, contractors, plumbers, electricians, carpenters and DIYers,” says Loren Doppelt, Director of Product Development and Marketing for Swanson Tool Company Inc., a pioneer in layout, leveling and measuring tools since 1925.
“Combined with an 8½-foot standout and pivoting magnetized tip design, the GripLine tape saves time spent securing conventional measures by allowing the user to grip multiple types of surfaces – such as metal conduit, rebar, threaded rod, PVC pipe – from a significant distance.”
MULTIFUNCTION, 360-DEGREE ROTATING TIP
The double-sided, high-visibility blade and pivoting tip allows contractors to catch surfaces not only from above and below the tape, but also from the side—invaluable when measuring off a wall corner while keeping the tape horizontal, so it doesn’t collapse. The GripLine tip also features two magnets, allowing it to easily connect with any metal object, such as ceiling grids, studs, beams or HVAC ductwork.
“This tape measure works so well with challenging rounded stock, it works even better with everyday construction because it simplifies any work application’s process,” says Doppelt.
Designed to boost contractor productivity, the Savage GripLine includes the following features:
High visibility dual-sided blade. Nylon-coated for extra durability, the 1-1/16-inch wide, dual-sided blade features large 3/8-inch markings for quick readings of both elevations and flat-surface measurements. The scale is graduated in 1/16-inch increments and clearly marked every 1/8-inch. From the 1-ft. mark and up, the wide blade marks off feet, as well as inches.
Quick reference symbols. Several easy-to-read markings eliminate guesswork, help boost jobsite productivity and increase accuracy. The tape features: 16-inch and 24-inch Stud-Centers to easily mark stud placement, as well as 19.2-inch-Framing-Centers or ‘black truss’ markings, used to position roofing rafters and/or floor joists.
Lever action belt hook. Forget pinched fingers or wrestling a tape back on to a tool belt. Instead of a traditional flat clip, the GripLine uses a thumb-lever-action clip to speed access to the tape and make storage quick and easy.
Generous standout. The dual-sided blade remains rigid even when extended up to 8-1/2-ft. An easy to use thumb-lock holds tape blade in place while taking measurements.
Durable construction. The multifunction, magnetic and pivoting tip is steel-reinforced with five-rivets to ensure firm gripping strength as well as longevity. The high impact-resistance case has a durable, non-slip molded rubber housing for added control and durability.
Guaranteed quality. Swanson Tool guarantees all Savage products through a limited lifetime warranty.
The new Savage GripLine tapes will be available nationwide in three lengths: 16-feet, 25-feet and 30-feet. Suggested retail prices for the new tapes range from $16.99 to $23.99, depending on length.
About Swanson Tool Company (www.swansontoolco.com)
Swanson Tool Company, Inc. is a leading manufacturer of innovative layout, leveling and measuring tools. The Frankfort, Ill.-based company pioneered the SPEED® Square in 1925, still a mainstay of professional builders. The company continues to design carpentry, layout, leveling and measuring tools for builders, carpenters, plumbers, electricians and do-it-yourself enthusiasts worldwide. For more information, call 815-469-9453 or visit www.swansontoolco.com.
via Press Release: Swanson® Tool Introduces First Tape Measure Designed To Grip Round Surfaces.
MILWAUKEE, WI – Milwaukee Tool continues to deliver disruptive innovation with the introduction of the first charging radio to bring the power of Bluetooth® to the jobsite. The most advanced radio of its kind, the M18™ Jobsite Radio/Charger allows the user to stream rich, full sound wirelessly from over 100 feet away. In addition, the Read more
MILWAUKEE, WI – Milwaukee Tool continues to deliver disruptive innovation with the introduction of the first charging radio to bring the power of Bluetooth® to the jobsite. The most advanced radio of its kind, the M18™ Jobsite Radio/Charger allows the user to stream rich, full sound wirelessly from over 100 feet away. In addition, the 2792 also serves as a quick and convenient charging station for Milwaukee M18™ Batteries and portable electronic devices.
“Milwaukee continues to raise the bar with best-in-class technology across all product categories,” says Tom Simeone, Group Product Manager for Milwaukee Tool Corporation. “Delivering the industry’s best reception and sound, this unique radio/charger features components designed from the ground up that not only give the user Bluetooth® capability, but also the ability to charge any M18™ battery without sacrificing reception or sound quality.”
In addition, the USB port charges most portable electronic devices over 50% faster than any competitors, and is the only device charger on the market that can work off battery power, rather than just AC power.
Backed by legendary Milwaukee durability, a reinforced roll cage and extruded aluminum handles protect internal components from weather and abusive job site conditions. The radio/charger also offers the industry’s largest on-board, weather-sealed storage compartment to protect the user’s small belongings and electronic devices. The user is even able to convert the radio into a portable entertainment center while charging tablets, with a built-in electronics stand.
Complete with an AM/FM Tuner with a digital processor, customizable equalizer, optimized speaker orientation and an on-board bottle opener, this revolutionary Jobsite Radio/Charger will set the new standard for quality and performance in this category.
Powered by Milwaukee’s revolutionary M18™ REDLITHIUM™ Battery, the M18™ Jobsite Radio/Charger is compatible with the entire M18™ System, now offering over 50 cordless Lithium-Ion products. Milwaukee® is committed to the ongoing development of this platform and will continue to provide innovative solutions that offer industry leading reliability, performance and ergonomics.
Specifications:
M18™ Jobsite Radio/Charger (2792-20)
Bluetooth® Compatible: yes
No-Interference Battery Charger: yes
Radio Pre-Set: FM (10), AM (10)
Frequency Response: 80 Hz – 20 KHz
Device Storage Space: 55in3
Aux Cable Length: 16″
USB Charger Output: 2.1 Amp
Size: 12” x 15” x 12”
Weight: 17lbs
Voltage: 18V
Includes 2292-20 M18™ Jobsite Radio/Charger*
*Batteries sold separately
About Milwaukee Tool Corporation
Since the company began in 1924, Milwaukee Tool Corporation has led the industry in both durability and performance by providing the best in professional, heavy duty tools and accessories. With an unwavering commitment to the trades, Milwaukee continues to lead with a focus on providing innovative, trade-specific solutions. Whether it is through their leadership in LITHIUM-ION technology, as seen in the M12™, M18™ & M28™ Systems, time-saving accessories or innovation new Hand Tool and Test Instrument product lines, Milwaukee is dedicated to delivering a steady stream of advanced solutions for the trades that offer increased productivity and unmatched durability. Milwaukee Tool Corporation is Brookfield, Wisconsin-based subsidiary of Techtronic Industries Co. Ltd. (TTI) (HKEx stock code: 669, ADR symbol: TTNDY). For more information on the full line of Milwaukee® products, please call 1-800-SAWDUST or visit www.milwaukeetool.com.
via Milwaukee® Introduces First Charging Radio with Bluetooth® for the Jobsite | Milwaukee Tool.