Hot & cold frost proof hydrants are not new but the TrueTemp by PRIER is a totally different faucet compared to any I’ve ever worked with in the past. The TrueTemp is a single handle frost proof with the styling of an indoor fixture available in two finished, Satin Nickel Plated & Oil Rubbed Bronze.
Focus: True Temp Installation
As part of a larger review process, ProStaff’er Andy Mickelson, owner of Mickelson Plumbing in Missoula, MT and I are each installing one. Andy has a spot for it at his own home, I’ve got it going in at the #duluthbuild project for my little sister’s new home.
I took delivery of the Oil Rubbed Bronze finish 12″ model #P-118L12-ORB last week and took it out of the box minutes before the video to get it mounted.
One of the things that stands out immediately with this faucet is the lack of visible mounting hardware, I like that. As you’ll see in the video there is a stainless steel mounting plate/ring that when attached to the mounting surface is completely hidden. Furthermore, this gives the faucet a totally different look than other hot/cold models.
The faucet ships with Phillips head stainless screws and the mounting plate. There were no instructions in the box, although its pretty simple to figure out, I think it may have just been forgotten in packaging. Here’s a link to the install instructions.
Mounting Prep for the True Temp
I had a PRIER 12″ model frost proof faucet roughed-in already. This required me to enlarge the existing 1″ hole in the mounting block to accommodate the new TrueTemp. I simply traced the hole in the mounting plate and cut the mounting block with my M12 jig saw. The correct hole saw size would be 1-3/4″ if installing at a new location. Step two was to align the mounting plate hole with the newly cut hole and attach using the stainless screws. This step requires the installer to level the tabs on the mounting plate, the tabs are the connection point between the faucet and mounting plate and need to be level to ensure the faucet is plumb.
Finally, the TrueTemp body is inserted and a half-turn clockwise engages the tabs and body to securely position the faucet, the final step is to install the remaining stainless screw in the very bottom of the body.
Watch for more info, next time I’ll cover the piping connection options and hot I installed it on my job.
Join the conversation: