Featured

Source Brewing is a destination, a place to enjoy a craft brew in a scenic location. And while you’re there, look overhead – you’ll see some Viega products adding to the décor. Located in Colts Neck, New Jersey, Source Brewing is in a 125-year-old converted barn. In trying to maintain some of the character of Read more

Source Brewing is a destination, a place to enjoy a craft brew in a scenic location. And while you’re there, look overhead – you’ll see some Viega products adding to the décor.

Located in Colts Neck, New Jersey, Source Brewing is in a 125-year-old converted barn. In trying to maintain some of the character of the barn, there are exposed beams.

Matt Fleming, Vice President of All Star Plumbing, knew he’d be running copper and carbon steel lines in the building. He also knew some lines would remain exposed, so he suggested Viega, because of its clean look and for several other beneficial reasons.

“The owners liked the look of it, with the exposed lines and such,” Fleming said. “When this job came up, I thought, ‘Let’s press everything in here and see how it goes.’

The flameless connection of Viega press technology was another benefit, since the crew was working in an old wooden structure. There was nothing to worry about, with no flame needed.

The brewery contains 12 tanks with glycol for chilling, and 2″ ProPress fittings were used on those copper lines. The 2″ carbon steel line feeding steam to three tanks was pressed with MegaPress fittings, and there are ¾″ branches from the tanks also done with MegaPress.

For the gas, a 1½” line equipped with MegaPressG fittings runs to the steam boiler. There’s about 100 feet of 1″ carbon steel line with MegaPressG fittings going to the mechanical room.

Mike Glaser, President of Aqua Solutions, installed the water filtration system for the brewery. Nearly all of his Annihilator Ultra Systems are installed with ProPress, and have been for the past decade. He said he uses Viega, because he knows he can’t beat the product.

“Viega is always consistent,” he said simply. “The fittings don’t break, they are reliable, and we don’t have issues with ProPress.”

“This is the first brewery that we’ve done everything with pressing,” Fleming added. “We’re realizing the time savings and efficiency, plus the lack of leaks. We’re not a big company, but we have five other brewery projects now on the forefront!”

Cherne Industries, part of the Oatey Co. family of brands, recently completed a historic move of its headquarters and manufacturing operations — its first in more than 60 years — to a newly constructed, 130,000-square-foot facility located in Shakopee, MN, situated 25 miles southwest of downtown Minneapolis. Opened in March, the manufacturing portion of the Read more

Cherne Industries, part of the Oatey Co. family of brands, recently completed a historic move of its headquarters and manufacturing operations — its first in more than 60 years — to a newly constructed, 130,000-square-foot facility located in Shakopee, MN, situated 25 miles southwest of downtown Minneapolis.

Opened in March, the manufacturing portion of the new, state-of-the-art headquarters was built to Cherne’s exacting specifications by the OPUS Group, as management sought to more fully integrate all its operations under one roof. Shakopee combines automated robotic manufacturing pneumatic pipe plugs, mechanical pipe plugs and testing equipment with a new research and development laboratory for product testing, extensive customer training facilities, and an in-house machine shop for making all the needed tooling on premises, rather than depending upon outside sources.

In addition, the new building contains ample storage space for raw materials and finished product, so that Cherne no longer relies on outside warehousing for storage and shipping. The resulting, more efficient material flows have already cut lead times and increased operating efficiencies since the move.

“Cherne has been growing at a double-digit pace for the past seven years,” says General Manager and seven-year company veteran David Biron, explaining why the former, 66,000-square-foot facility in nearby Edina was no longer suitable. “We had acquired some robotic equipment and other automation components in recent years, but as the business grew, we simply ran out of space.

“The R&D and testing operations demonstrate Cherne’s newly fortified capabilities as we maintain world class, industry-leading new-product development that provide the safest, most productive value-added solutions for our end users,” Biron continues. Cherne can now test its entire production on premises, instead of relying on outside facilities, as had sometimes been the case in the past.

“The old building did not offer a setting large enough — and therefore safe enough — to test larger plugs and testing equipment, which expand up to 120 inches,” says Biron. “No other plug maker can offer as comprehensive or as safe a testing facility as what we’ve built in Shakopee.”

Robotics = safer, longer-lasting plugs: The most impactful upgrade with the new Shakopee operation is the inclusion of a pair of automated robots for producing Cherne’s industry-first and industry-leading offering of pneumatic plugs. The robotic technology creates a mechanical bond to more securely join the plug’s aluminum end plate to its premium natural-rubber core.

The result is more precise and consistent fabrication, from plug to plug, minimizing field failures sometimes found with the manual, chemical-bonding connection process long used by other manufacturers. Cherne’s robotic-made plugs are a significant industry advancement, offering best-in-class safety, durability, and premium performance.

“No other North American manufacturer is building plugs with one robot, let alone two,” says Biron. “Other producers still assemble them by hand, as they have been for decades. This entire facility demonstrates the enduring strength of the Cherne brand and why a customer can be comfortable buying and installing plugs and related piping products from us.”

Rapid turnaround: Until this past March, every plug sold by Cherne over the past five decades and more had been made in the company’s former Edina facility, erected by founder Lloyd Cherne in 1970. (Oatey Co. bought Cherne in 1990.) So, it may seem surprising that the relocation to Shakopee required only seven days, as Biron reports, with the new plant successfully running 70 percent of the company’s catalog by the end of that first week.

Biron expects to employ 130 personnel, a gain of approximately 20 over Edina. Among the reasons Cherne chose to move to Shakopee was to tap its “wide cross-section of qualified workers” to fill the diversified roster of skilled technical positions needed to operate and maintain Cherne’s large, automated equipment at a high level.

“We drew it all up on a napkin two years ago,” recalls Biron, “and spent another 18 months meticulously planning the move down to the smallest detail. It was unbelievable how our team came together, and it could not have gone any more smoothly — even with all of our large pieces of equipment and despite the pandemic. In a year when everything seemed to go wrong, this move and its aftermath have gone exceptionally right.”

Some key partners that were critical to making the move go as well as it did were Cullinan Rigging and Erecting, OlympiaTech Electric, Voson Plumbing and Allen Mechanical. “Without their attention to detail and customer focus,” says Biron, “this move wouldn’t have been successful.”

To learn more about careers and opportunities available at Cherne Industries, visit oatey.com/careers.

Robust forecast is expected to beat pre-COVID-19 estimates by a significant margin. Hackettstown, N.J. — In its July update to the Kitchen & Bath Market Outlook, the National Kitchen & Bath Association (NKBA) revised its 2021 industry sales projection upward to $170.9 billion, up by a substantial 21.4% from 2020’s $140.8 billion in kitchen and Read more

Robust forecast is expected to beat pre-COVID-19 estimates by a significant margin.

Hackettstown, N.J. — In its July update to the Kitchen & Bath Market Outlook, the National Kitchen & Bath Association (NKBA) revised its 2021 industry sales projection upward to $170.9 billion, up by a substantial 21.4% from 2020’s $140.8 billion in kitchen and bath spending and nearly 8% higher than the initial estimate for the year.

New construction K&B spending is now expected to exceed 2020 by an impressive 28.5%, as builders attempt to keep pace with substantial demand. Meanwhile, K&B remodeling is expected to climb by 12.5%.

The update provides a comprehensive review of current industry conditions as well as macroeconomic factors — such as consumers opening their homes to workers post-pandemic and stimulus checks — likely to impact business.

“This update is very encouraging and confirms the ongoing robust performance of the design and remodeling industry,” said Bill Darcy, NKBA CEO. “This very strong sales forecast is attributable to pent-up demand for new home construction, easing COVID disruptions and a sea change in consumer behavior. People will continue to work from home in some capacity, fostering renovation of their space to meet their evolving needs. A tight inventory of homes for sale is also encouraging homeowners to stay put and renovate. That’s all good news for our industry.”

Darcy cautioned, however, that there are a few bumps in the road: Home prices continue to rise, and the cost of building materials is still high — a combination that’s excluding some potential buyers from the market; the employment picture still hasn’t fully recovered to pre-pandemic peaks, and supply-chain disruptions continue to delay jobs and make product sourcing a challenge. “But most indicators suggest the thriving K&B market will continue,” he added.

The industry should see double-digit increases in both kitchen and bath spending. This is a reversal from the industry’s 3.8% decline in 2020, which was driven by an 8.6% loss for remodeling and stagnant growth of just 0.5% for new construction during the pandemic.

Bathroom spending will rise by 22.3% in 2021 and will be sparked mainly by gains in new construction, while kitchen spending will increase by 20.4%, led by stronger gains in remodeling.

Among the report’s other key findings:

High-End Soars Even Higher: Although forecasts for low and mid-range project spending have each been revised upward, it’s the high-end that will shine. It’s now expected to surge by over 28% compared to 2020 (beating the initial 19.8% projection), as pent-up demand, robust savings and impressive house appreciation encourage homeowners to go the extra mile.

Job Recovery Lags: Not everyone is in a position to act. Although 14 million jobs have been recovered since the pandemic lows, total U.S. employment is still more than 8 million jobs below peak levels. At the current rate of job creation, it would take more than a year to fully recover. The unemployment rate, however, is receding to traditional levels, as some have left the job market entirely and are no longer counted.

Tailwinds for Housing Starts: Starts are expected to grow by 18% in 2021, a sharp upward revision over the initial forecast for the year. The spike in starts is partially owing to a plunge in available resale inventory. This portends a continued hot market for at least the short term, but relentless home inflation is beginning to flash warning signals, as more consumers are being priced out of the market.

Home Improvement Tops Discretionary Spending: Nearly 1 in 3 homeowners plan to boost their home-improvement discretionary spending this year, well above the 1 in 5 (or fewer) who plan such increases for eating out, entertaining, travel or health. In fact, the average home-improvement project price point is 25% higher than last year.

Kitchen & Bath Are Top Choices: For those planning home improvements this year, kitchens and primary baths rank #1 and #2, respectively, among a dozen home areas offered. More than half (55%) said they planned to remodel their kitchen, while 40% cited their primary bathroom. Exterior (37%), patio/deck (29%) and primary bedroom (29%) round out the top five.

Methodology:

The data presented in this report is compiled from a variety of sources: U.S. Census American Housing Microdata, National Apartment Association (NAA) Spending, the National Association of Realtors, Moody’s Analytics, Home Innovation Research Labs (HIRL) data, and John Burns Real Estate Consulting’s home improvement estimates and forecasts. In addition, a survey was conducted among 530 consumers to better understand spending behaviors as the COVID-19 pandemic subsides. The homeowners were over age 24, and only projects of $1,000 or more were included.

Clean, running water gifted to Illert family of Eureka, Missouri, through Hometown H2O  Former St. Louis Rams star Chris Long and partners Xylem and Water Well Trust provided a local family of four in Eureka, Missouri, access to clean water with a donated water well system, equipment, well drilling and pump installation. The Illert family Read more

Clean, running water gifted to Illert family of Eureka, Missouri, through Hometown H2

Former St. Louis Rams star Chris Long and partners Xylem and Water Well Trust provided a local family of four in Eureka, Missouri, access to clean water with a donated water well system, equipment, well drilling and pump installation. The Illert family – Justin Illert, veteran, age 30 yrs old, Sarah age 27, Lilah, age 5, and Austin, age 1 – was previously living without clean, running water in their home and relied on bottled water and rainwater for cooking and cleaning. The family now has reliable access to clean, potable water for the first time.

“It feels like we won the lottery,” said Sarah Illert, Water Well Trust beneficiary. “It means the world. It really is life changing for us. We are so grateful to have clean water to cook with, do our laundry, clean the dishes, and take clean showers and baths.”

The donation marked the fourth project between Xylem Inc., Water Well Trust and Hometown H2O, which is a domestic water program dedicated to bringing clean, sustainable water to people and communities in need across the United States. Hometown H2O – a program launched in early 2020 – is a united effort between retired NFL player Chris Long and his Foundation’s Waterboys initiative and water technology company Xylem Inc. to address domestic water scarcity issues, which currently leave more than 2 million Americans without access to clean water. Hometown H2O and Xylem work alongside the Water Well Trust, a national nonprofit that helps qualify low-income families. This project was also supported by beverage company Talking Rain, who donated water to project staff and made a financial contribution to the family.

“Nobody should have to live without access to clean water– especially the brave and honorable men and women that have served our nation,” said Chris Long, two-time Super Bowl champion and founder of the Chris Long Foundation. “Clean water access for many Americans is an increasingly serious problem. Since Hometown H2O launched in 2020, we have raised awareness for water equality that affects policy at the state and federal levels. We will continue to prioritize this mission in our future projects. The organizations we work with, including Xylem and Water Well Trust, bring industry expertise to the table, and passionately do what it takes to make these projects successful. Thank you to our supporting partners for helping us to change lives and ensure that clean, running water is a basic human need that no American lacks.”

Xylem donated Goulds Water Technology brand equipment while local distributor partner Water Works of Springfield, Missouri, coordinated the discounted installation through pump installer Schroepfer Well Drilling, Inc. of Franklin County, Missouri. A team of volunteers – from Water Works and Xylem employees – also donated time to clean up the property’s yard.

“The unacceptable reality is that many Americans do not have access to potable, running water,” said Susan O’Grady, Director of Marketing, Building Services and Agriculture, Xylem. “For Xylem and its partners, we are honored to be able to use our expertise and passion for the cause to bring this vital service to people who deserve to have clean water.”

Xylem and Waterboys, along with nonprofit partner Water Well Trust, seek to raise awareness about domestic water issues, including that more 2 million people in the U.S. lack access to clean, safe drinking water at home. Working in coordination with Watermark and the company’s Goulds Water Technology brand, this partnership delivers ongoing water well projects to provide rural communities with reliable, safe water access, which can lead to better overall health and improved quality of life.

Leading hot water solutions manufacturer Bradford White supports top snowboardcross competitor and master plumber as he races to compete in the 2022 Olympic Games in Beijing Bradford White Water Heaters, an industry-leading manufacturer of residential, commercial and industrial water heating and storage products, announces its continued support for master plumber and general contractor Jonathan Cheever Read more

Leading hot water solutions manufacturer Bradford White supports top snowboardcross competitor and master plumber as he races to compete in the 2022 Olympic Games in Beijing

Bradford White Water Heaters, an industry-leading manufacturer of residential, commercial and industrial water heating and storage products, announces its continued support for master plumber and general contractor Jonathan Cheever as he pursues his dream of competing in the 2022 Winter Olympics in Beijing.

The company has renewed its sponsorship agreement with Cheever, a 2018 U.S. Olympian and former national snowboardcross champion who has balanced world-class international competition with plumbing, general contracting and design work throughout his career.

Cheever credits his career in the skilled trades as the key factor allowing him to compete internationally for more than 15 years.

“My experience in the trades has been essential to my snowboarding career,” Cheever said. “Without the flexibility I found in the industry, I wouldn’t have had the freedom to race all over the world, from the U.S. and Canada to New Zealand, Europe and Asia. Plumbing has also taught me lessons in patience and resilience that have been critical to maintaining a professional snowboarding career for almost 20 years. I’m grateful not only for Bradford White’s generous support of my efforts but for their dedication to the entire trades profession.”

Cheever learned the plumbing trade from his father while growing up in Boston and earned his master plumber license in 2004. He currently operates Team Cheever Design Build in Park City, Utah, delivering high-quality residential and commercial plumbing, general contracting and interior design services.

“Jonathan represents peak achievement, not just in his sport but in his career as a hard-working tradesman and entrepreneur,” said Carl Pinto, Jr., senior director of marketing communications for Bradford White Corporation. “The dedication that he has demonstrated on the slopes has also fueled his success as a highly skilled plumber and contractor. While his accomplishments are extraordinary, they also reflect the commitment and discipline that define the trades. We’re proud to be working with him as he continues to chase his dreams.”

Cheever’s outstanding career accomplishments include multiple podium finishes in World Cup competition; a third-place finish in the overall 2010-11 World Cup standings; the 2010-11 U.S. championship in snowboardcross; and a place on the U.S. team at the 2018 Winter Olympics in PyeongChang, South Korea.