Product Spotlight

NCB-H Condensing Combi Boiler

Navien, Inc. announced three new innovations during their boiler virtual launch event on February 16. The three new products include the NCB-H condensing combi-boiler, NFC-H condensing fire tube combi-boiler and NFB-H condensing fire tube boiler.

Navien’s new NCB-H condensing combi-boiler series includes 5 models ranging from 160,000 BTU/H for DHW and 60,000 BTU/H for heating, to an industry first 210,000 BTU/H DHW and 150,000 BTU/H heating. The NCB-H uses durable dual stainless steel heat exchangers for heating and a separate flat plate stainless steel heat exchanger for DHW.

NFB-H Fire Tube Condensing Boiler

Advanced features on the NCB-H include 15:1 TDR for DHW and up to 11:1 TDR for heating, advanced controls with intuitive display, built-in advanced DHW recirculation controls, 2” venting up to 65’ and 3” venting up to 150’, common venting capability with up to 7 NPE tankless water heaters, cascade capability with up to 15 NPE tankless water heaters, field gas convertibility to NG high altitude (5,400 ft. to 10,100 ft.) or LP (up to 10,000 ft.) and a new DHW module with mixing valve and flow adjustment valve.

NCB-H is available to ship from Navien immediately.

NFC-H Fire Tube Condensing Boiler

Navien also revealed updates to their fire tube lines with the NFC-H fire tube combi-boilers and NFB-H fire tube boilers. Both the NFC-H and NFB-H now offer turndown ratios up to 15:1, powered connections for 3 zone pumps or 3 zone valves, easy to use Setup Wizard for improved installation, 2” venting up to 65’ and 3” venting up to 150’. The NFC-H also includes increased DHW performance with up to 210,000 BTU/H for DHW, offering up to 5.4 GPM at a 70-degree temperature rise. Both the NFC-H and NFB-H will begin shipping from Navien in April 2021.

Navien will host another virtual launch event focused on water heaters on March 16, 2021. Registration is still open for the event at navieninc.com/live. For more information on all products shown during Navien’s boiler virtual launch event, visit navieninc.com.

Reliance Worldwide Corporation (RWC), a market leader and manufacturer of water control systems and plumbing solutions for residential and commercial applications, was named NAHB’s 2021 Leading Suppliers Council Spark Award Runner-up.

As homeowners lean into smart-home technology, RWC’s StreamLabs Control is delivering on a crucial need: water and leak management. Thanks to its innovative technology, the leak detection device was honored as runner–up for the 2021 National Association of Home Builders (NAHB) Leading Suppliers Council (LSC) Spark Award.

As reported in Chubb’s 2017 Water Risk Survey, “[45%] of homeowners have or know someone who has experienced a water leak.” As an innovation-driven company, RWC saw an opportunity to help limit detrimental water damage with just a tap. Designed to track water usage, alert users of leaks and provide an automatic remote shut-off option, the StreamLabs Control, which installs directly into the main water line, connects to the complementary StreamLabs app to monitor the home’s water system 24/7.

It is the second product in RWC’s portfolio to be recognized by the LSC. The SharkBite EvoPEX push-to-connect system won the Spark Award in 2018.

According to the NAHB LSC Spark Award criteria, “winners are to demonstrate superior knowledge in developing cutting edge products and services, embrace a progressive outlook and exhibit a willingness to push the envelope when it comes to taking the home building industry to the next level.”

“We always seek new ways to innovate and create cutting edge products for customers,” said Jeff Long, RWC’s Product Manager Cash Acme & StreamLabs. “We’re extremely proud the StreamLabs Control has been recognized in such prestigious company. It is a great product, providing homeowners comfort and peace of mind that their homes are looked after.”

To learn more about the StreamLabs Control, visit streamlabswater.com. 

With the introduction of the HoldRite 703 In-Slab Tubing Support, HoldRite HydroFlame Large Diameter and 5-inch Firestop Sleeves, as well as improved HoldRite HydroFlame Pro Tub Boxes, RWC continues to bring efficiency and innovation to new construction. 

Atlanta — Reliance Worldwide Corporation (RWC), a leading manufacturer of premium branded push-to-connect plumbing products, valves, secondary pipe supports, firestopping solutions and fluid control technologies, is reinforcing its position as a trusted source for firestopping and in-slab plumbing products with the introduction of several new patent pending HoldRite HydroFlame firestopping products, as well as the new patent pending HoldRite 703 In-slab Tubing Support.

With these additions to the HoldRite portfolio, RWC is investing in innovations to create efficient and cost-effective solutions.

• HoldRite 703 In-Slab Tubing Support: A one-of a kind stub-up PEX and conduit support, this product helps prevent the common issue of in-slab tubing damage on the job site. Designed to accept 1/2-inch PEX tubing with 3/4-inch protective smurf tubing or 3/4-inch conduit, the support provides a protective recessed cavity in the upper portion of the concrete floor, allowing space for the protection of one to two 1/2-inch PEX tubes or 3/4-inch conduit.

• HoldRite HydroFlame Large Diameter Sleeves: With 8-inch,10-inch and 12-inch options, these large diameter sleeves are available in standard and hollow versions for use with metal, insulated and plastic pipe penetrations. HoldRite is the only manufacturer currently offering a 12-inch option, a 1-inch stackable extension — which can serve as a water dam when two are installed together after concrete is poured — and an OSHA-compliant 3-hour fire rated safety cap.

• HoldRite HydroFlame Pro 5-inch Sleeve: Included as an extension to the Pro series line-up is the addition of a 5-inch sleeve. This new base will come with an adjustable cap, allowing contractors to adjust the height of the sleeve from 7¼-inch to 8-inch without having to make a cut. The cap features locator whiskers to make locating the firestop device easier after concrete has been poured.

• Enhanced HoldRite HydroFlame Pro Tub Boxes: With two new knock-out positions, HoldRite’s tub box offers more flexibility to contractors when laying out a tub and drain. Where the previous model was only compatible with 2-inch firestopping sleeves, this model is compatible with 2-inch and 3-inch sleeves.

With the addition of the new products, RWC extends its track record of successfully solving challenges for contractors.

Preventing costly repairs and job delays
Typically, after concrete is poured, PEX and conduit tubing stub-ups are at risk of damage. To prevent costly repairs and job delays, RWC created the HoldRite 703 In-slab Tubing Support to help protect PEX and conduit in concrete, making stub-up plumbing and electrical installations easier. It also includes a protective cover plate and the HoldRite patented locator whiskers, providing a simple and faster way to find buried tubing after a concrete pour.

New innovations in firestopping needs
Since the introduction of the HoldRite HydroFlame Pro Series sleeves, RWC has continued to advance category growth to create complete firestopping solutions. The sleeves’ patented telescoping design eliminates cutting on the job site, and the patented locator whiskers take the hassle out of finding buried sleeves after a concrete pour. In addition to protecting against the spread of fire, smoke and gases, the sleeves also have a built-in W-rated water seal to prevent unwanted water intrusion.

Additionally, changes were made to the HydroFlame Pro Tub Box, which is intended to encompass a broader range of exotic drain and tub designs. Thanks to its new knock-out positions, there is no need for extensions, couplers or field modification positions. In this model, there is more flexibility available to the contractor when laying out the tub and drain. This provides more annular space for tight fits when layouts and spacing become an issue.

“Customers know and embrace the value and advantages of using HoldRite’s HydroFlame products for tubing support and firestopping needs,” said Jeff Hamilton, RWC’s HoldRite HydroFlame Product Manager. “We are constantly brainstorming to optimize products and bring forth new solutions that enable better ways of working to the market.”

STANLEY announced today three new additions to the brand’s portfolio of innovative cutting solutions. The latest collection from STANLEY®, a global leader in the hand tools market, features a versatile Utility Knife with 10-Blade Storage (STHT10479) and a Control-Grip™ Utility Knife (STHT10432). These knives are ideal for heavy duty cutting a variety of building materials, from drywall and shingles to flooring and packaging.

The new line of utility knives is the latest innovation to join the brand’s rich legacy of dependable tools, suitable for professional users across all trades. The latest offering by STANLEY provides razor-sharp performance, jobsite durability, comfortable use and easy blade change.

Additional features and benefits of each model include:

STANLEY® CONTROL-GRIP™ RETRACTABLE UTILITY KNIFE (STHT10432):

• Optimized shape and size for precise applications.
• Recessed blade slider and two-step blade release process engineered for safe blade change
• Offset knife nose to easily guide blade change.
• A convenient belt clip for portability and tether loop for lanyard attachments.

STANLEY® UTILITY KNIFE WITH 10-BLADE STORAGE (STHT10479):

• Slip resistant, bi-material handle.
• Offset knife nose to easily guide blade change.
• Curved design for challenging cuts.
• Integrated 10-blade storage in the handle.

“STANLEY has been a well-known leader in the utility knife category since the early 1900’s. We take great pride in creating a legacy of tools known for their reliability.” said Michelle Knapp, Product Manager at STANLEY Tools. “The new line of STANLEY® utility knives has something for every customer, ensuring precise cuts no matter the job,” added Knapp.

The full lineup of STANLEY® utility knives includes:

These products are available for purchase in stores and online at The Home Depot. For more information about availability and pricing, please visit www.STANLEYtools.com.