Berko

Marley Engineered Products, a leader in high-performance, reliable heating and ventilation equipment, introduces the out-of-sight, out-of-mind UL listed In-Floor Perimeter Convector – THX Series heater, which delivers comfort, aesthetics and safety for the ultimate supplemental heat system for both new and existing buildings. Offered by QMark and Berko brands, the THX Series directly addresses the Read more

Marley Engineered Products, a leader in high-performance, reliable heating and ventilation equipment, introduces the out-of-sight, out-of-mind UL listed In-Floor Perimeter Convector – THX Series heater, which delivers comfort, aesthetics and safety for the ultimate supplemental heat system for both new and existing buildings.

Offered by QMark and Berko brands, the THX Series directly addresses the building’s need for supplemental heat against the curtain walls and glazing, while fully integrating with the architects’ designed interior spaces. The unit drops directly into the floor, leaving only the grille visible, for unobstructed sightlines and more design space with which to work.

While THX can be installed in a small area for minimal disruption, it also features the highest output/cu.ft. of any pure convection, in-floor electric heater on the market today(1). With a comparable range of outputs as Marley’s above-ground convectors, THX comes with the added benefits of being virtually hidden.

“The Marley THX Series provides supplemental heat that’s out-of-sight and out-of-mind due to its zero vertical profile,” said Andrew Martin, Product Manager for Marley Engineered Products. “In-ground heating takes up less space, and THX units are the most compact in-ground comfort solution in their class(2), while still providing maximum heating performance.”

Keeping interior aesthetics intact, THX also helps open rooms up to natural light and outdoor scenery as it keeps windowed surfaces free from fog and moisture. The units ward off condensation by warming the interior side of curtain walls and floor-to-ceiling glazing.

The benefits of the THX Series go beyond clarity. THX units create an effective draft barrier that protects a building’s curtain walls, preventing the primary HVAC system from becoming overtaxed, and avoiding inefficiency and higher utility costs. The convection draft barrier improves overall HVAC performance with no fumes or exhaust for an environmentally-friendly heat solution.

THX units have been designed with durability in mind and include features focused on water and debris management – UL approved, sealed junction boxes and debris catch screens to name a few. “These product innovations, and more, are incorporated for THX to withstand busy foot traffic, cleaning, water and debris,” says Martin. “Whether units are installed in the floor, on the wall or on the ceiling, there should be an inherent piece of mind knowing you have chosen a quality, durable product, and the THX is no different.”

THX saves time, effort and money with modularized units that can be configured by one service professional for easy field connection, control and installation. Additionally, each and every unit is factory wired and preassembled for out-of-the-box readiness, drop-in installation, and easy access for cleaning and maintenance.

The frame, leveling legs and grille options are standard for all THX units, allowing for the choice of mount that best fits the install site. Options include flush or surface grilles, and three UL listed mounting styles, making it a highly versatile installation.

“The Marley THX Series is the ultimate in-floor convector for nearly any space where maximum comfort and aesthetic appeal is desired,” added Martin. “THX provides safe and comfortable heat to occupants, and is efficient and economical for building professionals and owners.”

The Marley In-Floor Convector – THX Series is available in multiple volt, wattage, and control configurations, with modular lengths beginning at 2ft.

To learn more about the Marley In-Floor Convector – THX Series, visit http://www.marleymep.com or locate the nearest Marley Engineered Products sales rep at http://www.marleymep.com/en/berko/where-to-buy/.

Blustery days with chilling winds can cause heating problems in many facilities with high volumes of foot traffic. While the main rooms within the building may be warm from the primary heating source, many areas are left out in the cold as drafts bring the temperatures down. Vestibules, lobbies, entrance ways and hallways can all Read more

Blustery days with chilling winds can cause heating problems in many facilities with high volumes of foot traffic. While the main rooms within the building may be warm from the primary heating source, many areas are left out in the cold as drafts bring the temperatures down. Vestibules, lobbies, entrance ways and hallways can all see a steady flow of people moving in and out throughout the day, opening doors and letting in chilly air.

To counteract these cold drafts, facilities should consider fan-forced wall heaters that provide continuous comfort through optimized airflow. Gentle heating sources are often not powerful enough to provide sufficient warmth in drafty areas. Fan-forced wall heaters however, push back on the infiltrating cold air, ensuring occupants feel the warmth as soon as they enter the building and until the moment they leave.

Functionality is Key

Cold air manages to find its way into facilities by any means necessary – whether it’s through vents, cracks, crevices or unsealed windows. Specialized heating units can stop these drafts before they spread throughout a building, bringing down temperatures and reducing overall heating efficiency.

Fan-forced wall heaters with an automatic delay eliminate cold drafts on start-up and discharge residual heat from the heater body during shut down. This helps attack drafts at their source while making the best use of available heat. In addition, consider fan-forced wall heaters that come with an integrated thermostat allowing for easy adjustment of room temperature to maintain a desired comfort level.

Perhaps a lobby is experiencing high foot traffic at the beginning and at the end of the workday, but have less heating requirements in the middle of the day. The adjustable thermostat allows occupants to alter the wall heater’s output based on need, ensuring no heat is wasted and temperatures remain comfortable. QMark and Berko’s commercial fan-forced wall heaters offer contemporary styles to match any room décor while ensuring adjustable warmth throughout the year.

Safety First

As with any heating unit, it is imperative to select high-quality products that offer protection against common safety risks. In terms of general design, fan-forced wall heaters come with a clear, easily accessible power on/off switch for added safety during maintenance, as well as a tamper-proof plug for the thermostat hole.

Also, look for fan-forced units with a manual reset thermal overheat protector that disconnects the power in the event of accidental blockage. This will ensure a quick repair while mitigating risk of injury. Furthermore, units that include permanently lubricated fan motors report increased longevity and lower maintenance needs, while gently distributing warmth throughout a designated area. Make sure the fan is powerful enough to offset drafts while quiet enough to eliminate unnecessary noises that may disrupt daily activities.

Key Takeaways

Every time a door opens during the cooler months, drafts blow in and bring a chilling effect into heated spaces. To neutralize the draft threats, consider installing a fan-forced wall heater to regain warmth and ensure comfortability for all occupants. Commercial fan-forced wall heaters from Berko and QMark provide strong yet safe sources of heat for the draftiest of spaces.

About the author: Andrew Martin is a product manager at Marley Engineered Products®, a leading North American designer and manufacturer of reliable comfort heating and ventilation solutions for residential, commercial and institutional buildings. Recognized by contractors, architects, engineers and HVAC professionals for providing a wide range of high-performance, reliable heating and ventilation solutions, Marley Engineered Products’ brands include QMark®, Berko®, Fahrenheat® and Leading Edge®.

Marley Engineered Products’ manufacturing operations are based in Bennettsville, S.C., with regional sales representatives located throughout the U.S. and an administrative office in Burr Ridge, Ill. For more information, please visit www.marleymep.com.