HVAC

For use with Bosch Greentherm Tankless Water Heaters Clean, efficient alternative to conventional furnaces When used with tankless water heater it produces both efficient heat and virtually endless hot water Simple setup requires a single gas line and venting system for the tankless water heater Single burner system on the tankless water heater promotes increased Read more

  • For use with Bosch Greentherm Tankless Water Heaters
  • Clean, efficient alternative to conventional furnaces
  • When used with tankless water heater it produces both efficient heat and virtually endless hot water
  • Simple setup requires a single gas line and venting system for the tankless water heater
  • Single burner system on the tankless water heater promotes increased service life, requires lower maintenance than traditional furnace and hot water system

Bosch Thermotechnology Corp. launches its new Bosch Hydronic Air Handlers offering a more efficient, compact and advanced home heating system. When paired with the Bosch Greentherm Gas Condensing Tankless Water Heater, homeowners can benefit from a more efficient heating system with a virtually endless supply of domestic hot water.

The new Bosch Hydronic Air Handler can replace furnaces with a ducted system, eliminating the need for a gas pipe, venting and fresh air intake required for furnaces.

The entire system is easily managed by an integrated control board that connects to the home’s thermostat. When the thermostat calls for heat, the air handler immediately activates the integrated pump, turning on the fan 30 seconds later, allowing the heat exchanger to preheat to deliver comfortable warm air from start-up. After the thermostat is satisfied, the blower runs an additional 30 seconds to deliver conditioned air. The Bosch Hydronic Air Handler has an integrated pump timer that turns on the water circulator for 2 minutes every six hours to help prevent bacteria growth in the hot water system.

The Bosch air handler may be configured to work with A/C systems, providing a complete heating, cooling and hot water solution. When the thermostat calls for cooling, the control board activates only the blower.

The new hydronic air handler connects seamlessly with tankless water heaters, transferring the unit’s highly efficient hot water through a hydronic heating coil. As the hot water circulates through the pipe, warm air is sent through the residential duct system. The cool water in the hydronic coil then recirculates to the tankless unit to be reheated.  Two models – AHU 50 and AHU 70 – can be sized with most cfm and BTU output ratings to suit most typical size homes.

Combining both the Bosch Hydronic Air Handler and an ENERGY STAR 95% EF-rated Greentherm Tankless Water Heater results in an ultra-efficient heating and domestic hot water system. Plus, the combined system can provide home heating and hot water simultaneously so homeowners don’t sacrifice comfort. The product carries a limited five year parts and one-year limited labor warranty (see full warranty details at www.boschheatingandcooling.com).

For more information on the new Bosch Hydronic Air Handler, visit www.boschheatingandcooling.com.

I just finished up an awesome few days at the 2016 AHR EXPO in Orlando, Florida. And what a show it was with over 60,000 in attendance. This show was top notch top to bottom and front to back. This show had fantastic energy and displayed some great new products. And even though it’s considered Read more

I just finished up an awesome few days at the 2016 AHR EXPO in Orlando, Florida. And what a show it was with over 60,000 in attendance. This show was top notch top to bottom and front to back. This show had fantastic energy and displayed some great new products. And even though it’s considered an HVACR show, there’s plenty of products, tools, and technology for plumbers and plumbing contractors to learn about, especially those that install and service any top of radiant heating and hydronic systems whether it be residential or commercial.

For those who were unable to attend, I will highlight a few items that caught my attention as unique.

The ROPOWER® by Rothenberger

Rothenberger Ropower

This nifty RoPower tool by Rothenberger can thread a pipe quickly but one of the greatest advantages it has is its ability to thread pipe with the proper amount of threads so plumbers and installers no longer need to count each thread. You set it, forget it, and the machine does all the work for you correctly.

Key Features

  • Quick and reliable threading, trimming, deburring, and grooving
  • Die head Type R (automatic with integrated oil feed)
  • Complete pre- and post-processing of pipe

 

Milwaukee® Tool’s M12™ 7.8KP Thermal Imager with DUAL SENSE™ Pixels

Milwaukee Tool Dual Sense Thermal Imager

This unique Thermal Imager from Milwaukee Tool can easily assist in finding leaks under concrete and behind walls. The Imager is fully compatible with the simple and powerful Thermal Imager Report Software available online at www.milwaukeetool.com, which makes analyzing images and generating reports quick and easy. Contractors and plumbers can easily download images from the Thermal Imager and show them to their customer on a larger screen such as a laptop, tablet, or any other computer. Every image capture creates a versatile PNG file format image that can also be easily e-mailed for added convenience. This powerful device comes at a very affordable price for all plumbers at around $500.

 

Webstone Pro-Connect™ Valves & Fittings

Webstone Pro Connect Valves and Fittings

This new ProConnect product from Webstone simplifies the connection process of connecting to Pex, CPVC, and the Aquatherm product. Some additional benefits include:

Key Features

  • No more solder, glue, clamps, costly tools or clean-up!
  • Push-on connection to copper, CPVC or PEX
  • Easily recover from installation & deburring mishaps
  • Forged from DZR Brass for use underground

 

Most Unique Experience At The AHR EXPO

This belongs to Rheem who displayed their mobile traveling trailer experience fully loaded with their products on display with a side-deck that expanded from the side of the trailer like a modern RV living room to display additional HVAC products. In addition, they displayed an 8-panel network of hi-resolution touch screens to interact with and take a look inside from every angle of their products. This state-of-the-art mobile learning center can be customized to offer hands-on product training, host special events or serve as an alternative to a trade show booth. It can also be easily rebranded to showcase either Rheem or Ruud products.

This experience was certainly a unique highlight of the show. Learn more about this Mobile Trailer Experience by Rheem.

Rheem AHR EXPO 2016 Rheem AHR EXPO 2016 Touch Screen

 

 

Building Health Check, LLC, a reseller (distributor) and marketer of the Halo Disinfection System™, which eliminates 99.9999% of Clostridium difficile (C. diff) spores in entire rooms announced the registration with the United States Environmental Protection Agency (EPA Registration No. 84526-6).  It is the first disinfectant fogging system validated by the EPA to kill Clostridium difficile Read more

Building Health Check, LLC, a reseller (distributor) and marketer of the Halo Disinfection System™, which eliminates 99.9999% of Clostridium difficile (C. diff) spores in entire rooms announced the registration with the United States Environmental Protection Agency (EPA Registration No. 84526-6).  It is the first disinfectant fogging system validated by the EPA to kill Clostridium difficile (C. diff) spores.

The Halo Disinfection System™ also kills many other pathogens typically found in hospitals and healthcare environments using a patented solution of hydrogen peroxide and ionic silver applied in a dry mist by a cost-effective portable fogger.

The Halo Disinfection System incorporates the HaloFogger™ using the healthcare-grade HaloMist™ solution. The system is an easy-to-use, economic and highly effective alternative to “spray & wipe”, UV light and other disinfecting strategies. During hands-free use, the HaloFogger converts the HaloMist into a clear, odorless dry mist that reaches in and around every surface in an enclosed area. There is no need to mix the solution, nor is there any need for rinsing or wiping.

After application, HaloMist decomposes into water and oxygen molecules, dries on contact and does not harm sensitive medical equipment. The system does not contain or produce chlorine, hypochlorite (bleach), alcohol, aldehydes, phenols, ammonium compounds or sodium hydroxide. These toxins and harsh chemicals can be found in many other disinfecting solutions.

During a recent study of the HDS system at Pennsylvania Hospital, a 496-bed urban teaching hospital in Philadelphia, PA, infection control experts cut the rate of C. diff infections by 66% after deploying the HDS system in patient rooms, operating rooms and treatment areas. In a similar study, Southwestern Vermont Medical Center experienced a period of more than 6 months without a single hospital-acquired C. diff case. These results suggest that the system offers a comparatively simple, inexpensive way to comply with a federal mandate to reduce C. diff HAI infections 30% by 2016.

Pentair launches this week at the International Builders Show and The International Surface Event, that its leading brand of electric floor heating systems—Nuheat—now works with the Nest Learning Thermostat. The Nuheat SIGNATURE launched in 2014 and was the world’s first wifi thermostat for electric floor heating systems; this marks the next development stage of that Read more

Pentair launches this week at the International Builders Show and The International Surface Event, that its leading brand of electric floor heating systems—Nuheat—now works with the Nest Learning Thermostat.

The Nuheat SIGNATURE launched in 2014 and was the world’s first wifi thermostat for electric floor heating systems; this marks the next development stage of that thermostat. “The integration with Nest further advances the role of floor heating in whole home comfort,” said Wally Lo, Product Manager. “We continue to lead innovation in our category and are excited to be working with Nest.”

Through the integration, Nest’s combination of sensors, algorithms and machine learning can prompt the Nuheat SIGNATURE program to react to home occupancy. Homeowners can enjoy both comfort and energy savings with their floor heat. Staying home? The floor heat will remain on keeping you comfortable. Leaving earlier or arriving later than expected? The floor heat will turn off to save energy.

The Works With Nest features work with any installed Nuheat SIGNATURE and does not require added hardware or software updates. The Nuheat SIGNATURE will continue to retail for $265USD.

Homeowners will also now have the added option to control their floor heat with the Nest app or at https://home.nest.com.

Nuheat SIGNATURE Product Features:

  • Out-of-the-box compatible with Nest Learning Thermostat
  • WiFi – Easily connects to WiFi network; 802.11 b/g/n compatible and a fully secure network WEP,

    WPA and WPA2

  • Remote Access – Control via smartphone apps (iOS and Android) or web browser
  • Weather – Local outdoor temperature and daily weather forecast
  • Energy Usage – View hourly, weekly and monthly usage

Greenheck is proud to announce that Tim Kilgore, president of sales and marketing, has been appointed as the 2015-2016 president of The Air Movement and Control Association (AMCA) International, Inc. Board of Directors.  AMCA is a global association of HVAC equipment manufacturers. Kilgore said, “I am proud to serve AMCA and its members in its Read more

Greenheck is proud to announce that Tim Kilgore, president of sales and marketing, has been appointed as the 2015-2016 president of The Air Movement and Control Association (AMCA) International, Inc. Board of Directors.  AMCA is a global association of HVAC equipment manufacturers.

Kilgore said, “I am proud to serve AMCA and its members in its 99th year – a time of profound and exciting industry change and challenge. AMCA’s mission is to promote the health, growth and integrity of the air systems industry. Despite all that is changing, this mission remains the foundation for all that we do.”

Kilgore holds a bachelor’s in industrial engineering from Purdue and an MBA from Marquette. He is also an active volunteer in the Wausau community, where he has served as president of the Rotary Club and chairman of the American Heart Association’s Heart Walk. He was also formerly vice president of the Wausau Entrepreneurial and Education Center. Kilgore has held positions on the boards of the United Way of Marathon County, the North Central Technical College Foundation and the Wausau Youth Hockey Association.